|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
1 / 9 asb inc. sales@asb .co.kr tel: +82 - 42 - 528 - 7223 august 20 11 as l03h 5 - 35 00 mhz mmic amplifier parameters units typical frequency mhz 900 2000 gain db 19.5 14.2 s11 db - 18 - 20 s22 db - 14 - 12 output ip3 1) dbm 31 32.5 noise figure db 0.9 1.0 output p1db dbm 17.5 18 current ma 36 36 device voltage v 4.3 4.3 1) oip3 is measured with two tones at an output power of +0 dbm/tone separated by 1 mhz. parameters units min typ max testing frequency mhz 2000 gain db 14.2 s11 db - 14 s22 db - 12 output ip3 dbm 32.5 noise figure db 1.0 output p1db dbm 18 current ma 36 device voltage v 4.3 * please find the max. input power data from http://www.asb.co.kr/pdf/maximum_input_power_analysis.pdf parameters rating operating case temperature - 40 to + 85 c storage temperature - 40 to + 150 c device voltage +4.7 v operating junction temper a ture + 150 c input rf power ( cw, 50ohm matched)* 20 dbm feature s description typical perfor m ance absolute maximum ratings 14.2 db gain at 2 ghz 18 dbm p1db at 2 ghz 32.5 dbm output ip3 at 2 ghz 1.0 db nf at 2 ghz mttf > 100 years single supply the ASL03H, a wideband linear low noise amplifier mmic, has a low noise and high linearity at low bias current, being suitable for use in both receiver and transmitter of telecommunic a tion systems up to 3.5 ghz. s11 down to C 20 db is easily achieved for low noise application to provide a good productivity. the amplifier is available in a n sot - 363 package and passes through the stringent dc, rf, and reliabi l ity tests. application circuit 10 ~ 88 mhz 800 ~ 3500 mhz 400 ~ 500 mhz 800 ~ 1000 mhz 1600 ~ 2000 mhz 1800 ~ 2200 mhz product specifications package style: sot - 363 pin configuration pin no. function 1 rf in 4 rf out / bias 2,3,5,6 gnd
2 / 9 asb inc. sales@asb .co.kr tel: +82 - 42 - 528 - 7223 august 20 11 as l03h 5 - 35 00 mhz mmic amplifier note : 1. the number and size of ground via holes in a circuit board is critical for thermal and rf grounding consi d- erations. 2. we recommend that the ground via holes be placed on the b ottom of lead pin 2 for better rf and thermal pe r- formance, as shown in the dra w ing at the left side. pin no. function pin no. function. 1 rf in 4 rf out / bias 2 gnd 5 gnd 3 gnd 6 gnd mounting recommendation (in mm) outline drawing symbols dimensions (in mm) min nom max a 0.90 1.00 1.10 a1 0.025 0.062 0.10 a2 0.875 0.937 1.00 b 0.20 0.30 0.40 c 0.10 0.125 0.15 d 1.90 2.00 2.10 f 1.15 1.25 1.35 e1 2.00 2.10 2.20 e -- 0.65bsc -- e1 -- 1.30bsc -- l -- 0.425ref -- esd classification hbm class 1a voltage level: 400 v mm class a voltage level: 50 v caution: esd - sensitive device! moisture sensitivity level (msl) level 3 at 260 c reflow esd classification & moisture sensitivity level 3 / 9 asb inc. sales@asb .co.kr tel: +82 - 42 - 528 - 7223 august 20 11 as l03h 5 - 35 00 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of +0 dbm/tone sep a- rated by 1 mhz. board layout ( fr4, 40x40 mm 2 , 0.8t) schematic s - parameters & k - factor frequency (mhz) 10 88 magnitude s21 (db) 20.3 19.1 magnitude s11 (db) - 18 - 20 magnitude s22 (db) - 20 - 15 output p1db (dbm) 16.5 16 output ip3 1) (dbm) 25.5 27 noise figure (db) - 1.5 device voltage (v) 4.3 4.3 current (ma) 36 36 application circuit 10 ~ 88 +5 rf out ASL03H rf in vs=5 v r1=680 w c3=1 m f l1=10 mh c1=1 m f c2=1 m f c4=100 pf c5=10 nf r2=20 w 0 20 40 60 80 100 0 5 10 15 20 25 gain (db) frequency (mhz) 0 20 40 60 80 100 -30 -25 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 0 20 40 60 80 100 -25 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) 4 / 9 asb inc. sales@asb .co.kr tel: +82 - 42 - 528 - 7223 august 20 11 as l03h 5 - 35 00 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of +0 dbm/tone sep a- rated by 1 mhz. board l ayout ( fr4, 40x40 mm 2 , 0.8t) schematic s - parameters & k - factor frequency (mhz) 900 2000 magnitu de s21 (db) 19 14 magnitude s11 (db) - 10 - 14 magnitude s22 (db) - 12 - 12 output p1db (dbm) 16 17.5 output ip3 1) (dbm) 29.5 32 noise figure (db) 0.8 0.9 device voltage (v) 4.3 4.3 current (ma) 36 36 application circuit 800 ~ 3500 +5 v 0 500 1000 1500 2000 2500 3000 3500 0 5 10 15 20 25 gain (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 -25 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) rf out ASL03H rf in c3=100 pf vcc=5v c4=10 nf c2=82 pf c1=82 pf l1=39 nh l2=39 nh r1=20 w 5 / 9 asb inc. sales@asb .co.kr tel: +82 - 42 - 528 - 7223 august 20 11 as l03h 5 - 35 00 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of +0 dbm/tone sep a- rated by 1 mhz. board layout ( fr4, 40x40 mm 2 , 0.8t) schematic s - parameters & k - factor application circuit frequency (mhz) 400 450 500 magnitude s21 (db) 23 22.5 22 magnitude s11 (db) - 18 - 18 - 13 magnitude s22 (db) - 15 - 15 - 15 output p1db (dbm) 16.5 output ip3 1) (dbm) 30 noise figure (db) 1 .15 1.25 1.4 device voltage (v) 4.3 4.3 4.3 current (ma) 36 36 36 400 ~ 500 +5 v rf out ASL03H rf in c4=100 pf vcc=5v c5=10 nf c2=100 pf c1=100 pf l1=47 nh r1=20 w c3=0.75 pf l2=27 nh 200 300 400 500 600 700 0 5 10 15 20 25 30 gain (db) frequency (mhz) 200 300 400 500 600 700 -25 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 200 300 400 500 600 700 -25 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) 6 / 9 asb inc. sales@asb .co.kr tel: +82 - 42 - 528 - 7223 august 20 11 as l03h 5 - 35 00 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of +0 dbm/tone sep a- rated by 1 mhz. board layout ( fr4, 40x4 0 mm 2 , 0.8t) schematic s - parameters & k - factor application circuit frequency (mhz) 800 900 1000 magnitude s21 (db) 20 19.5 19 magnitude s11 (db) - 18 - 18 - 15 magnitude s22 (db) - 14 - 14 - 15 output p1db (dbm) 17.5 output ip3 1) (dbm) 31 noise figure (db) 0.85 0.9 1.05 device voltage (v) 4.3 4.3 4.3 current (ma) 36 36 36 800 ~ 1000 +5 v rf out ASL03H rf in c4=100 pf vcc=5v c5=10 nf c2=100 pf c1=100 pf l1=47 nh r1=20 w c3=0.75 pf l2=8.2 nh 600 700 800 900 1000 1100 1200 0 5 10 15 20 25 gain (db) frequency (mhz) 600 700 800 900 1000 1100 1200 -25 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 600 700 800 900 1000 1100 1200 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) 7 / 9 asb inc. sales@asb .co.kr tel: +82 - 42 - 528 - 7223 august 20 11 as l03h 5 - 35 00 mhz mmic amplifier 1) oip3 is measured with two tones at a n output power of +0 dbm/tone sep a- rated by 1 mhz. board layout ( fr4, 40x40 mm 2 , 0.8t) schematic s - parameters & k - factor application circuit frequency (mhz) 1600 1800 2000 magnitude s21 (db) 16 15 14 magnitude s11 (db) - 20 - 20 - 14 magnitude s22 (db) - 11 - 12 - 15 output p1db (dbm) 17.5 output ip3 1) (dbm) 32 noise figure (db) 0.85 0.9 1.0 de vice voltage (v) 4.3 4.3 4.3 current (ma) 36 36 36 1600 ~ 2000 +5 v rf out ASL03H rf in c4=100 pf vcc=5v c5=10 nf c2=100 pf c1=100 pf l1=47 nh r1=20 w c3=1 pf l2=3.3 nh 1200 1400 1600 1800 2000 2200 2400 0 5 10 15 20 25 gain (db) frequency (mhz) 1200 1400 1600 1800 2000 2200 2400 -25 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 1200 1400 1600 1800 2000 2200 2400 -25 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) 8 / 9 asb inc. sales@asb .co.kr tel: +82 - 42 - 528 - 7223 august 20 11 as l03h 5 - 35 00 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of +0 dbm/tone sep a- rated by 1 mhz. board layout ( fr4, 40x40 mm 2 , 0.8t ) schematic s - parameters & k - factor application circuit frequency (mhz) 1800 2000 2200 magnitude s21 (db) 15 14.2 13.5 magnitude s11 (db) - 20 - 20 - 15 magnitude s22 (db) - 11 - 12 - 14 output p1db (dbm) 18 output ip3 1) (dbm) 32.5 noise figure (db) 0.9 1.0 1.0 device voltage (v) 4.3 4.3 4.3 current (ma) 36 36 36 1800 ~ 2200 +5 v rf out ASL03H rf in c4=100 pf vcc=5v c5=10 nf c2=100 pf c1=100 pf l1=47 nh r1=20 w c3=1 pf l2=2.7 nh 1400 1600 1800 2000 2200 2400 2600 0 5 10 15 20 25 gain (db) frequency (mhz) 1400 1600 1800 2000 2200 2400 2600 -30 -25 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 1400 1600 1800 2000 2200 2400 2600 -25 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) 9 / 9 asb inc. sales@asb .co.kr tel: +82 - 42 - 528 - 7223 august 20 11 as l03h 5 - 35 00 mhz mmic amplifier rf out ASL03H rf in vs=5v r1= 1.1k w c3=1 m f l1=82 n h c1=100 pf c2=100 pf c4=1 nf c5=100 pf r2= 20 w 0 200 400 600 800 1000 1200 0 5 10 15 20 25 gain (db) frequency (mhz) 0 200 400 600 800 1000 1200 -25 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 0 200 400 600 800 1000 1200 -35 -30 -25 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 200 400 600 800 1000 0 1 2 3 4 5 stability factor frequency (mhz) 1) oip3 i s measured with two tones at an output power of +0 dbm/tone sep a- rated by 1 mhz. board layout ( fr4, 40x40 mm 2 , 0.8t) schematic s - parameters & k - factor frequency (mhz) 470 860 magnitude s21 (db) 19.4 17.7 magnitude s11 (db) - 14 - 15 magnitude s22 (db) - 18 - 1 8 output p1db (dbm) 15 15 output ip3 1) (dbm) 28 28 noise figure (db) 1.05 1.05 device voltage (v) 4.3 4.3 current (ma) 36 36 application circuit cmmb 470 ~ 860 +5 v |
Price & Availability of ASL03H |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |